Beer Line
7244
more... |
Beer Line
Beer Line Clear 3/8 (per metre) | | 3/8 inch outside diameter. Connects directly into the 3/8 John Guest, Speedfit, fittings. | | |
| | | Tags: 3/8Line | |
|
5217
more... |
Beer Line
Beer Line Clear 3/16 (per metre) | | 3/16 inch outside diameter. Connects directly into the 3/16 John Guest, Speedfit, fittings. | | |
| | | Tags: 3/16Line |
9531
more... |
Beer Line
Beer / CO2 Gas Line 3/8 (per metre) | | This high quality product the Valpar Brewmaster CO2 Gas Line (3/8 inch outside diameter) can be used to conduct either beer or gas. It is specially manufactured to minimize bacterial action. It is both tough and resilient. You may purchase it in any metre length you require. Connects directly into the 3/8 John Guest, Speedfit, fittings. | | |
| Product Currently Unavailable | | Tags: 3/8Line | |
|
5809
more... |
Beer Line
Pipe Insulation [Python/Lagging] (per metre) | Maintain temperatures longer and/or reduce condensation with this closed cell insulation.
Can fit diameters:
- 1x 3/8" line
- 3x 3/16" lines
| | |
| |
4077
more... |
Beer Line
Beer Line Clear 1/4 (per metre) | | 1/4 inch outside diameter. Connects directly into the 1/4 John Guest, Speedfit, fittings. | | |
| |
8115
more... |
Beer Line
Beer Line Clear 5/16 (per metre) | | 5/16 inch outside diameter. Connects directly into the 5/16 John Guest, Speedfit, fittings. | | |
| |
4968
more... |
Beer Line
Braided Tubing 1/2 ins (per metre) | | 1/2 inch internal diameter. More rigid than unbraided pipe. The braiding helps to hold the tube fully open and stop kinks. Good for permanent placements and anything requiring a tougher hose. Fits onto 1/2 in barbed hose stems. | | |
| | |
|
5358
more... |
Beer Line
Braided Tubing 3/8ins (per metre) | | 3/8 inch internal diameter. More rigid than unbraided pipe. The braiding helps to hold the tube fully open and stop kinks. Good for permanent placements and anything requiring a tougher hose. Fits onto 3/8 inch barbed hose stems. | | |
| Product Currently Unavailable | |
|
2646
more... |
| Product Currently Unavailable | | Tags: 15mmLine |
6220
more... |
Beer Line
15mm Compression Coupler | | Fits 15mm copper pipe. | | |
| | | Tags: Straight15mm |
3166
more... |
Beer Line
15mm LP Isolating Value with handle | | Fits 15mm copper pipe. | | |
| | | Tags: Straight15mmTapValve |
7692
more... |
Beer Line
Regulator (Primary + Secondary) | | Fits standard professional / industrial CO2 cylinder with gauge (0 - 2.5 bar, 35lb/sq in) and secondary which fits 3/8" gas pipe. | | |
| | | Tags: 3/8Regulator | |
|
9221
more... |
Beer Line
Regulator (Primary) Wall Mount | | Fits standard professional / industrial CO2 cylinder with gauge (0 - 140 bar, 2000 psi) leading to 3/8" gas pipe. | | |
| Product Currently Unavailable | | Tags: 3/8Regulator |
9117
more... |
Beer Line
Regulator (Primary) Wall Mount | | Fits standard professional / industrial CO2 cylinders. Has two gauges (0 - 140 bar, 2000 psi) and (0 - 4 bas, 60 psi). 3/8" speedfit gas pipe outlet. | | |
| |
7535
more... |
Beer Line
Regulator (Secondary) | | Fits 3/8" beer line with gauge (0 - 4 bar, 60lb/sq in) on secondary. | | |
| | | Tags: 3/8Regulator | |
|
DSI
4210
more... |
DSI
Non-Return Valve | | For use in 1/2 BSP cone end connectors to fit on the Gas In side of a DSI keg coupler. | | |
| | | Tags: MiscellaneousValve | |
|
John Guest
4023
more... |
| | | Tags: StraightStemBarbed1/2 |
8393
more... |
John Guest
Speedfit, 3/8 - 1/2 Stem Enlarger | | 3/8 inch stem to 1/2 inch speedfit connector. | | |
| Product Currently Unavailable |
4075
more... |
John Guest
Speedfit, 3/8 - 1/4 NPTF Threaded Stem Adaptor | | 3/8 inch stem to 1/4 NPTF thread. | | |
| |
4803
more... |
| | | Tags: 3/8Straight1/4StemBarbed |
3258
more... |
John Guest
Speedfit, 5/16 - 3/8 Stem Enlarger | | 5/16 inch stem to 3/8 inch speedfit connector. | | |
| Product Currently Unavailable |
9677
more... |
John Guest
Speedfit, Angled Shut Off Tap | | Right-angled shut off tap with 1/4 NPTF female thread at bottom and 3/8 inch speedfit connection to side. | | |
| |
9154
more... |
John Guest
Speedfit, Collet locking tool (fits 3/16 to 1/2) | | |
| | | Tags: Miscellaneous |
6757
more... |
John Guest
Speedfit, 3/16 - 3/16 Bulkhead Connector | | Capable of clamping bulkhead up to 1/2 inch (15mm) thick | | |
| | | Tags: 3/16Bulkhead |
9948
more... |
John Guest
Speedfit, 3/8 - 3/16 Reducing Elbow Connector | | |
| | | Tags: 3/83/16Elbow |
1612
more... |
John Guest
Speedfit, 3/8 - 3/16 Flow Restrictor | For slowing the flow of beer inline.
Can be set to variable restrictions to cater for different in/out pressures.
Has a locking sleeve to stop accidental adjustment and a locking clip to prevent tampering in permanent installations.
Can be used at any angle. Comes supplied with mounting bracket for fixing to a surface if desired. | | |
| | |
|
6223
more... |
John Guest
Speedfit, 3/8 - 3/16 Reducing Straight Connector | | |
| | | Tags: 3/8Straight3/16 | |
|
4074
more... |
John Guest
Speedfit, 3/8 - 5/16 Flow Restrictor | For slowing the flow of beer inline.
Can be set to variable restrictions to cater for different in/out pressures.
Has a locking sleeve to stop accidental adjustment and a locking clip to prevent tampering in permanent installations.
Can be used at any angle. Comes supplied with mounting bracket for fixing to a surface if desired. | | |
| |
5039
more... |
John Guest
Speedfit, 3/8 - 3/16 Stem Elbow | | 3/8 male stem to 3/16 female connector | | |
| | | Tags: 3/83/16ElbowStem |
2750
more... |
John Guest
Speedfit, 3/8 - 3/16 Stem Reducer | | 3/8 stem to 3/16 speedfit connection | | |
| | | Tags: 3/8Straight3/16Stem |
1432
more... |
John Guest
Speedfit, Tube Insert 1/4 | | Inserts into 1/4 inch inside diameter tubing which usually has a 3/8 inch outside diameter. | | |
| | | Tags: 1/4Insert | |
|
5069
more... |
John Guest
Speedfit, 3/8 - 1/4 Female Adaptor Flare | | |
| | | Tags: 3/8Straight1/4Thread | |
|
4046
more... |
| | | Tags: 3/8Straight1/4Thread |
6358
more... |
John Guest
Speedfit, 3/8 - 1/4 Male Straight Adaptor | | 3/8 speedfit connection to 1/4 NPTF screw thread. | | |
| |
6298
more... |
John Guest
Speedfit, 3/8 - 1/4 Stem Reducer | | 3/8 inch stem to 1/4 inch speedfit connection. | | |
| | | Tags: 3/8Straight1/4Stem |
1560
more... |
John Guest
Speedfit, Tube Insert 5/16 | | Inserts into 5/16 inch inside diameter tubing. | | |
| | | Tags: Insert5/16 | |
|
7954
more... |
John Guest
Speedfit, 3/8 - 5/16 Elbow | | Speedfit, 3/8 - 5/16 Reducing Elbow Connector | | |
| Product Currently Unavailable |
1475
more... |
John Guest
Speedfit, 3/8 - 5/16 Reducing Straight Connector | | |
| Product Currently Unavailable |
4335
more... |
John Guest
Speedfit, 3/8 - 5/16 Stem Elbow | | 3/8 inch stem through elbow to 5/16 inch speedfit connector. | | |
| | | Tags: 3/8ElbowStem5/16 |
7295
more... |
John Guest
Speedfit, 1/2 - 3/8 Stem Reducer | | 1/2 inch stem to 3/8 inch speedfit connection. | | |
| |
4807
more... |
John Guest
Speedfit, 3/8 - 5/16 Stem Reducer | | 3/8 inch stem to 5/16 inch speedfit connection. | | |
| | | Tags: 3/8Straight3/16Stem |
3995
more... |
John Guest
Speedfit, 5/16 - 1/4 Stem Reducer | | 5/16 inch stem to 1/4 inch speedfit connection. | | |
| |
1389
more... |
| | | Tags: 3/8Straight3/16StemBarbed |
4366
more... |
John Guest
Speedfit, 3/8 - 3/8 Bulkhead Connector | | Capable of clamping bulkhead up to 1/2 inch (15mm) | | |
| | | Tags: 3/8Bulkhead |
9779
more... |
John Guest
Speedfit, 3/8 - 1/8 BSP | | 3/8 inch speedfit connection to male 1/8 BSP. | | |
| |
8915
more... |
John Guest
Speedfit, 3/8 Regulator connector | | Connects most secondary regulators to 3/8 inch gas line. | | |
| | | Tags: 3/8RegulatorThread | |
|
4272
more... |
| Product Currently Unavailable | | Tags: TapMiscellaneous |
9407
more... |
John Guest
Speedfit, Strain Relief Boot | | Use this product to prevent kinking of the 3/8 beer/gas line at vulnerable places. | | |
| | | Tags: 3/8LineMiscellaneous |
2219
more... |
John Guest
Speedfit, 3/8 Tee with offset tap | 3/8 tee piece with a shut off valve (tap) on the central connection.
Allows on/off control of a spur line from a main (continuously on) line.
Has three screw down fixing points. | | |
| | | Tags: 3/8TeeTapValve |
8198
more... |
| Product Currently Unavailable | | Tags: 3/8StraightStemBarbed |
4847
more... |
John Guest
Speedfit, Tube Insert 3/8 | | Inserts into 3/8 inch inside diameter tubing. | | |
| | | Tags: 3/8Insert | |
|
7509
more... |
John Guest
Speedfit, 1/2 - 3/8 Three Way Divider | 1/2 inch speedfit connection splits into 3 x 3/8 inch speedfit connections.
Has two screw down fixing points. | | |
| |
1222
more... |
John Guest
Speedfit, 3/8 - 1/2 BSP Cone End | 3/8 inch speedfit connection to female 1/2 BSP.
For use with non-return valves on the Gas In side of a keg coupler. | | |
| | | Tags: 3/8StraightThread1/2 BSP | |
|
7114
more... |
John Guest
Speedfit, 3/8 - 1/2 BSP Flat End | 3/8 inch speedfit connection to female 1/2 BSP.
Has a broad seal making this a good all-purpose connector.
Commonly used on the Beer Out side of a keg coupler. | | |
| | | Tags: 3/8StraightThread1/21/2 BSP | |
|
3582
more... |
John Guest
Speedfit, 3/8 - 1/2 BSP Tap Adaptor | | Has an internal flange to prevent seal from moving when used with narrowly rimmed appliances (e.g. taps). | | |
| | | Tags: 3/8StraightTapThread1/21/2 BSP | |
|
4731
more... |
John Guest
Speedfit, 3/8 - 3/4 BSP Flat End | | 3/8 inch speedfit connection to female 3/4 BSP. | | |
| |
5134
more... |
John Guest
Speedfit, 3/8 - 3/8 BSP Flat End | | 3/8 inch speedfit connection to female 3/8 BSP. | | |
| |
8552
more... |
John Guest
Speedfit, 3/8 - 5/8 BSP Flat End | 3/8 inch speedfit connection to female 5/8 BSP.
Has a broad seal making this a good all-purpose connector.
Used on the Beer Out side of some keg couplers. | | |
| |
2421
more... |
John Guest
Speedfit, Keg Beer Outlet Adaptor | Fits onto standard UK keg coupler's beer outlets regardless of type (e.g. S,G,A types etc.). Uses brass nut for extra durability.
Uses a radial seal as well as a face seal for increased fastening.
Has speedfit connection for use with 3/8 inch beer line. | | |
| | | Tags: 3/8StraightThread1/2 BSP | |
|
9372
more... |
John Guest
Speedfit, 15mm Double Check Valve | 15mm to 15mm speedfit connections. Provides one way flow.
Double Check Valves ensure the prevention of
contamination arising from back syphonage, back
flow and cross connection.
A spring loaded internal check valve is sited
either side of the test cock and an arrow
identifies the direction of flow. The low
headloss design and fast installation time
makes this unit the ideal selection. The valve
can be mounted in any position.
The valve can also be used for domestic hot
and cold water supplies. | | |
| | | Tags: Straight15mmValve |
2965
more... |
John Guest
Speedfit, 3/8 Single Check Valve | 3/8 to 3/8 speedfit connections. Provides one way flow.
Super Speedfit acetal Single Check Valve ensures protection against reversal of flow.
The low headloss design and fast installation time makes the valve the ideal
selection. The valve is designed for use with liquids, it is not suitable for air and
vacuum applications. | | |
| | | Tags: 3/8StraightValve |
3709
more... |
John Guest
Speedfit, Keg Gas Inlet Adaptor | Fits onto standard UK keg coupler's gas inlets regardless of type (e.g. S,G,A types etc.). Uses brass nut for extra durability.
Contains a non-return valve for use with CO2 and mixed gasses. Uses a radial seal as well as a face seal for increased fastening.
Has speedfit connection for use with 3/8 inch gas line.
| | |
| | | Tags: 3/8StraightThread1/2 BSPValve | |
|
1861
more... |
| | | Tags: 15mmStemBarbed1/2 |
2477
more... |
| Product Currently Unavailable | | Tags: 3/8StraightStemBarbed1/2 |
1651
more... |
John Guest
Speedfit, 15mm - 3/8 Stem Reducer | | 15mm stem to 3/8 inch speedfit connection. | | |
| | | Tags: 3/8Straight15mmStem |
7078
more... |
John Guest
Speedfit, 15mm - 3/8 Reducing Straight Connector | | |
| | | Tags: 3/8Straight15mm |
2771
more... |
John Guest
Speedfit, 3/8 x 3/4 BSP Adaptor (tap) | | 3/8 inch speedfit connection to female 3/4 BSP. | | |
| Product Currently Unavailable | | Tags: 3/8StraightTapThread3/43/4 BSP | |
|
7170
more... |
John Guest
Speedfit, 15mm x 1/2 Connector - Hose Stem | | 15mm speedfit connection to 1/2 inch barbed hose stem | | |
| | | Tags: Straight15mmBarbed1/2 |
3972
more... |
John Guest
Speedfit, Straight Adaptor 18mm x 1/2 BSP | | |
| | | Tags: StraightThread1/218mm |
Micromatic
3627
more... |
Micromatic
Non-Return Valve (duck billed) | | For use in 1/2 BSP cone end connectors to fit on the Gas In side of a Micromatic keg coupler. | | |
| | | Tags: MiscellaneousValve | |
|
Back to TopWWW.STONEHELM.CO.UK ------------------------------------------------------------------------- © 2004 - 2011 Stonehelm. All rights reserved
|
Tube Insert 1/4 
Single Tap Bar Outlet (Pump) with Drip Tray 
1/2 ins Syphon Tubing (buy per metre) 
Tube Insert 3/8 
3/8 Regulator connector 
3/8 Blanking Plug 
Non-Return Valve (duck billed) 
3/8 - 1/2 BSP Cone End 
3/8 - 3/16 Reducing Straight Connector 
3/8 - 3/16 Flow Restrictor 
1/4" Syphon Tubing (buy per metre) 
Beer Line Clear 3/8 (per metre) 
Beer / CO2 Gas Line 3/8 (per metre) 
Connector (Liquid OUT) 
Connector (Gas 'IN') 
5/16 ins Syphon Tubing (buy per metre) 
Regulator (Secondary) 
Regulator (Primary + Secondary) 
3/8 ins Syphon Tubing (buy per metre) 
Braided Tubing 3/8ins (per metre) 
Non-Return Valve 
Keg Gas Inlet Adaptor 
3/8 - 1/2 BSP Tap Adaptor 
Keg Beer Outlet Adaptor 
3/8 - 1/2 BSP Flat End 
Counterflow Plate Chiller 